SI-EST-SCP-TS-200L

 Description

This compact solar heater is capable of heating water to temperatures of consumer. The objective of the model is to achieve superior performance and durability.

 

The system used in this model is the natural circulation of fluid (water/glycol) between the collector and the accumulator/heat exchanger. Vacuum tubes are filled with fluid which is the natural heat transmitter. Heat is radiated, captured and transmitted to the inner tube and naturally heat rises to the top, inside the accumulator. When the fluid temperature inside the vacuum tubes increase, temperature rises in the accumulator and simultaneously fluid of lower temperatures drop towards the end of the vacuum tubes, causing a natural circulation of heat within the system.

 

Use of this solar heater is especially suitable for houses, so that the installation of the system can perform a simple way to produce hot water at a constant temperature. To optimize the system, one must use a mixing valve rated at a temperature of consumption. With the antilegionella system, not only does this produce hot water safely, but you can get more quantity than traditional systems because there is no limitation on the volume.

 

To ensure optimum performance, the unit has a mechanism that makes filling the tank automatically easy to ensure the optimal level of storage, as well as a lung to relieve the expansion of it.

 Data

Technical Data

Dimensions

Height

1.5 m

 

Width

1,5 m

 

Profundity

2.485 m

 

Occupancy Area

3.73 m2

 

Aperture Area

2 m2

 

Absorber Area

2 m2

Inner tank

Material

Stainless Steel type AISI 316, according to European Standard UNE-EN 10025

 

Thickness

1.2 mm

 

Volume of Tank

200 liters

 

Pressure tolerance

3 kg/cm2 = 300 kPa = 3 Bars

 

Maximum pressure

4 kg/cm2 = 400 kPa = 4 Bars

 

Diameter

375 mm

 

Welding

Argon

Hydraulic Connections

Quantity

2

 

Dimensions (In / Out)

3/4"

Insulation

Material

Polyurethane foam high density expanded rigid, free of CFC'S

 

Thickness

45 mm

 

Density

36 kg/m3

 

Thermal expansion

3.3x10-4 W/m.k

Outer tank

Material

Lacquered steel AISI 430, according to European Standard UNE-EN 10025

 

Thickness

0,4 mm

 

Diameter

520 mm

 

Length

1485 mm

Protective seal

Material

EPDM

End Caps Side

Quantity

2

 

Material

Lacquered Steel type AISI 430, according to European Standard UNE-EN 10025

COLECTOR

Quantity

1

Cover

Quantity

1

 

Material

Anti-reflective tempered glass with low iron content ≤ 0,01 %

 

Thickness

3 mm

 

Transmittance

≥ 87 %

Resistance

Hailstone

Up to 25 mm diameter

 

Pressure

0.8 MPa

 

Freezing

- 30º C

 

Wind

+ 30 m/s

Absorber

Hydraulic design

Grid

 

Quantity

7 Copper sheets with 140 mm Black Chrome

 

Material

Cu and Al with selective anodized coating

 

Type

ASTM C 12200 - EN CuDHP, según normas Europeas (UNE-EN 1057 y UNE-EN 12165)

 

Absorption coefficient α

90 ± 2 % (AM 1.5)

 

Emission coefficient ε

5 ± 2 % (80º C)

 

Loss coefficient

0,6 W/(m2 x ºC)

Hydraulic connections

Quantity

2

 

Dimensions

1/2"

Vertical tubes

Quantity

2

 

Diameter

Ø 12 mm

 

Thickness

0.6 mm

Horizontal tubes

Quantity

7

 

Diameter

Ø 25 mm

 

Thickness

0.5 mm

 

Distance between pipes

136 mm

Frame

Side

Material

Anodized Aluminum alloy

 

Thickness

1 mm

Rear

Materials

Lacquered Steel/Galvanized Steel

 

Thickness

0.4 mm/0.25 mm

Insulation-Side

Material

Fiberglass

 

Thickness

20 mm

Insulation-Rear

Material

Rockwool

 

Thickness

35 mm

Sealing rubber

Material

Vinyl Rubber Methylsilicone 110 UV stabilized and resistant to high temperatures

Fluid

Type

Water + Antifreeze

 

Volume

2 liters

 

Recommended flow

50 ~ 150 l/m2h

 

Flow

0.046 kg/s m2

Operating parameters

Working temperature

+ 95º C

 

Maximum working temperature

+ 99º C

 

Minimum working temperature

- 20º C

 

Estagnation temperature

< 150º C

 

Effective thermal capacity

9.5 W/m2k

 

Daily efficiency

> 55 %

 

Volume of water at 40º C

3 ~ 4 people

Installation angle

(minimum-maximum)

Degrees

38º ~ 45º

Number maximum systems in battery

Units

4

Support structure

Material

Stainless Steel type SUS 430, or

Galvanized Steel type AISI 301

 

Thickness

1.5 mm

Safety valve

Material

Plastic ABS

Assistant electric

Power

1500 W

 

Voltage

220 V

 

Connection

1”

Weight

In vacuum

48 kg

 

With fluid

210 kg

Performance Graphs

 Drawings

Size

Installation Orientation

 Pictures

  • 001001
  • 002002

 Videos

 Certificates

Our manufacturing plants have been prepared in accordance with the ISO 9001:2008, in terms of Quality Management Systems.

 

Our manufacturing plants have been prepared in accordance with the ISO 14001:2004, in terms of Environmental Management System.

 

Our manufacturing plants have been prepared in accordance with the OHSAS 18001:2007, in terms of Occupational Health and Safety Management Systems.

 

We have a quality control divided into three elements:

  • Regular inspections allow us to guarantee the quality of the raw material.

  • Quality control in the process of our manufacturing procedures.

  • Quality control of finished products, we conduct through inspections and tests of reliability and performance.

The Systems solar thermal have passed several international certification requirements and continue to improve the quality and performance of our products of proven technologies. Quality is one of our core principles and the pursuit of quality is the engine of the company's future, in their desire to continually offer better products.

 

Our Systems solar thermal are certified by internationally recognized laboratories and are proof of our strict adherence to international safety standards, long term performance and overall quality of products.

 

ISO 9001:2008

ISO

 

SQCC CNAS IAF  ISO 9001

ISO 14001:2004

ISO

 

CMSCC CNAS IAF  ISO 14001

Ensayos Laboratorio

FRAUNHOFER DAR ilac-MRA  TEST-LABORATORIO

Keymark

DIN-CERTCO KEYMARK KEYMARK  KEYMARK

España

MINISTERIO DE INDUSTRIA, TURISMO Y COMERCIO MINISTERIO DE INDUSTRIA, TURISMO Y COMERCIO  MINISTERIO DE INDUSTRIA, TURISMO Y COMERCIO

SABS

SABS 

México

ONNCCE 

QC100

  

Australia

SAI GLOBAL AUSTRALIAN STARDARD JAS-ANZ STANDARD MARK

 Guarantee

Manufacturing Defects

  • 5 years.

 Packing

Box

 

Container 20’

 

Container 40’

 

 Downloads

Technical Data (pdf)